制冷電氣控制系統(tǒng)是冷庫始終自動的在設定范圍內工作的必要條件，-山東制冷機組-其主要工作流包括： A、當壓縮機工作后：冷庫達到設定的溫度，停止壓縮機工作，當庫溫回升達到設定的溫度，壓縮機重新起動開始制冷；本文來源：制冷百科。-濟南冷庫設計- B、自動除霜：一般為6小時左右自動啟動除霜加熱動作，除霜有兩個控制參數(shù)，一為時間,一為溫度，兩個條件中到達一個即除霜過程結束，結束后要留2分鐘左右的滴水時間再進行制冷，使冷庫溫度盡快達到使用要求的溫度。山東冷庫安裝- C、警報功能：在溫庫超過設定要求時發(fā)出警告，以便及時處理食品安全-山東冷庫價格。 D、安全要求：冷庫的整體環(huán)境比較潮濕，而且其表面都是金屬材料，容易產生漏電，所以與冷庫庫體內置的電器好用低電壓設備，如照明燈，防凝露電熱線等。-建冷庫價格
The refrigeration and electrical control system of Shandong Dingsheng refrigeration equipment Co., Ltd. is a necessary condition to ensure that the cold storage is always working within the set range. Its main workflow includes: A, when the compressor work: the cold storage reached the set temperature, stop the compressor work, when the temperature rise to reach the set temperature, the compressor start to start refrigeration; this article source: Refrigeration encyclopedia. B, automatic defrosting: generally for 6 hours or so automatically start defrosting and heating action, defrost has two control parameters, one is time, one is the temperature, one is the end of the defrosting process in two conditions, and the drop time of 2 minutes is left after the end of the cooling, so that the temperature of the cold storage can reach the required temperature as soon as possible. C, alarm function: warnings are issued when the temperature library exceeds the set requirements, so as to ensure food safety in a timely manner. D, safety requirements: the overall environment of the cold storage is wet, and its surface is metal material, easy to produce electricity leakage, so the electrical appliances built in the cold storage tank are best used for low voltage equipment, such as lighting, anti condensation electric hotline and so on.
本文由山東冷庫安裝提供，更多精彩請關注山東鼎勝制冷設備有限公司“sddszl”。

查看全部介紹